Gutter Installation Cost in 2026: Full Price Guide
Most homeowners pay $600 to $2,400 to have gutters professionally installed in 2026, with the national average running $1,200 to $1,600 for a single-story home. Aluminum seamless gutters at $6 to $12 per linear foot are the most common choice. Larger homes, premium materials, and complex rooflines push totals higher.
Use our gutter installation cost calculator to get a fast estimate based on your home size and material choice before calling any contractor.
Gutter installation cost by material
| Material | Cost per linear foot (installed) | Lifespan |
|---|---|---|
| Vinyl | $3 to $6 | 10 to 20 years |
| Aluminum | $6 to $12 | 20 to 30 years |
| Steel (galvanized) | $8 to $14 | 20 to 30 years |
| Copper | $20 to $40 | 50 to 100 years |
| Zinc | $18 to $35 | 40 to 80 years |
Cost by home size
| Home size | Estimated linear feet | Typical installed cost |
|---|---|---|
| Small (under 1,200 sq ft) | 100 to 150 ft | $600 to $1,200 |
| Medium (1,200 to 2,500 sq ft) | 150 to 200 ft | $900 to $2,000 |
| Large (2,500 to 4,000 sq ft) | 200 to 300 ft | $1,400 to $3,200 |
| Very large (over 4,000 sq ft) | 300 ft plus | $2,500 to $5,000+ |
How much is 100 ft of gutter?
A 100-linear-foot gutter project costs roughly $600 to $1,200 installed with standard aluminum seamless gutters. At $6 per foot on the low end and $12 per foot at the high end, labor and materials combined land in that window for a straightforward single-story run. Vinyl at $3 to $6 per foot would come out to $300 to $600 for 100 feet, while copper at $20 to $40 per foot would be $2,000 to $4,000 for the same run. Always get itemized quotes so you see material and labor broken out separately.
How much is 200 linear feet of gutters?
Two hundred linear feet of aluminum seamless gutters typically costs $1,200 to $2,400 installed. That range covers a mid-sized two-story home or a larger single-story ranch. If the roofline has many corners and miter cuts, labor runs toward the top. If you add old-gutter removal ($50 to $200) and fascia repairs where needed, budget an extra $300 to $600 on top of the base install cost. Use our gutter cost calculator to run the numbers for your exact footage and material choice.
How much to put gutters on a 1,000 sq ft house?
A 1,000-square-foot house typically needs 100 to 130 linear feet of gutter. At aluminum pricing of $6 to $12 per foot installed, the total comes to $600 to $1,560 for the gutters themselves. Add two or three downspouts at $50 to $100 each and factor in old-gutter removal if existing gutters are coming off, and most 1,000-square-foot projects land in the $700 to $1,800 range all in. A smaller footprint means less material but not proportionally lower labor, since the crew setup cost is roughly the same regardless of size.
How much is a 60 ft seamless gutter?
A 60-foot seamless aluminum gutter run costs roughly $360 to $720 installed at typical 2026 pricing. Many contractors charge a minimum service fee of $150 to $300 for small jobs because the setup cost is similar regardless of run length, so a 60-foot project may come in at $400 to $800 even at the low per-foot rate. Confirm whether the quote includes downspouts, end caps, and old-gutter removal before comparing bids.
What drives the final price
- Material choice. Vinyl is cheapest but least durable. Aluminum is the most popular balance of cost and longevity. Copper is a premium option that rarely needs replacement.
- Stories and roofline complexity. Two-story homes cost more because installers need taller ladders and take longer per foot. Multiple roof angles add corners and miters that slow the job.
- Old gutter removal. Removing and disposing of existing gutters typically adds $50 to $200 to the total. Always ask whether removal is included in the quote.
- Downspout count. Most quotes include two to three downspouts per run. Additional downspouts cost $50 to $100 each installed.
- Regional labor rates. Labor in coastal metro areas runs 20 to 40 percent higher than in rural Midwest or Southeast markets.
- Fascia board condition. Rotted or damaged fascia behind the gutters must be repaired before new gutters go up, adding $200 to $800 to the project.
Seamless vs. sectional gutters
The industry standard in 2026 is seamless gutters, roll-formed on site from a single piece of aluminum or steel. They have fewer joints, so they leak less and last longer than sectional gutters joined from pre-cut pieces. Seamless gutters cost roughly $1 to $3 more per linear foot installed, but the reduced maintenance usually justifies the premium over a 10-year ownership window. For any primary residence, seamless is the right call.
Cost of gutters for a 2,000 square foot house
A 2,000-square-foot home typically needs 150 to 200 linear feet of gutter. At aluminum seamless pricing of $6 to $12 per foot, the installed cost runs $900 to $2,400. Add fascia inspection, downspouts, and old-gutter removal and the full project budget is typically $1,100 to $2,800. Get quotes from at least three licensed gutter installers to find the best price in your market.
Cost of gutters for a 1,500 sq ft house
A 1,500-square-foot home typically needs 120 to 165 linear feet of gutter. At $6 to $12 per foot for aluminum seamless, the installed cost is roughly $720 to $1,980. Most 1,500-square-foot single-story projects land in the $900 to $1,600 range all in. Two-story homes of that footprint run higher because of the additional ladder time and complexity.
How to get the best price
Collect at least three quotes from licensed gutter companies. Prices for the same scope can differ by 30 to 50 percent between contractors. Ask each to itemize materials, labor, old-gutter removal, and downspouts so you compare identical scopes. Spring and fall are peak seasons for gutter work; scheduling in winter or midsummer sometimes yields a modest discount. Verify each contractor holds a valid license and general liability insurance before signing.
Frequently asked questions
How much do gutters cost per linear foot installed? Aluminum gutters, the most common choice, run $6 to $12 per linear foot installed. Vinyl costs less at $3 to $6, while copper can reach $20 to $40 per foot.
How long does gutter installation take? Most single-story homes take 2 to 4 hours for a full installation. Two-story homes or complex rooflines can take 6 to 8 hours or more.
Should I add gutter guards at the same time? Yes, if your budget allows. Installing gutter guards during the initial installation is cheaper than adding them later because the crew is already on-site with ladders up.
Is Home Depot gutter installation a good deal? Home Depot offers gutter installation through third-party contractors. Pricing is competitive in some markets but can run higher than a locally sourced licensed installer. Get a Home Depot quote alongside two local contractor bids to compare total cost and warranty terms.
Bottom line
Budget $600 to $2,400 for a typical gutter installation job in 2026, with most homeowners landing around $1,200 to $1,600 for aluminum seamless on a single-story home. Use our gutter cost calculator to refine that figure for your footage and material choice, then get quotes from a licensed gutter installer in your area before committing.
Get real gutter installation quotes
Compare free, no-obligation quotes from vetted local pros near you.Get my free quotes
Advertising disclosure: we may earn a commission from quote requests, at no cost to you.
Related guides
- Gutter Cost Per Linear Foot: 2026 Pricing by Material
- Seamless Gutter Installation Cost: 2026 Pricing Guide
- Gutter Guard Cost: 2026 Pricing by Type and Brand
- Gutter Replacement Cost in 2026: What to Expect
- Gutter Material Cost Guide: Aluminum, Copper, Vinyl, and Steel (2026)
- Gutter Installation Labor Cost: What You Pay for Work (2026)
- Gutter Installation Cost Guide